copyright © sign explosion 2009
Customer's Log In
SIGNWRITING
PRINTING
PHOTOGRAPHY
CARE OF MAGNETIC SIGNS
Clean any dust on both vehicle and the magnetic sign before you apply the magnetic sign on to a vehicle (the surface should be clean and dry)
Magnetic signs hold best to flat or slightly curved surfaces. If your magnetic sign is positioned incoretly or has air pockets, remove the sign and re-align it. Do not slide magnetic signs it can cause scratches on your vehicle or on the magnetic sign.
Remove and clean the magnetic sign and vehicle surface at least once a week, with mild detergent
Do not apply the magnetic sign on the vehicle while it is cold and stiff, it does not properly grip the vehicle surface
Avoid use on horizontal metal surfaces exposed to direct sunlight (such as automobile hoods) or temperatures exceeding 60°C (Please note: Black vehicles absorb more sun heat)
It's also very important to store your magnetic signs flat when not using them.
Store your magnetic sign with the print or vinyl side out, do not stack with magnetic sides facing each other
When removing a magnetic sign always try to pull it from middle, pulling signs from corners may cause curled corners.
Go Back to Home Page
